
Free Shipping
Klargester NSBE015 Bypass Oil Separator 8335 m2
Size | |
Flow L/S | 15 |
Peak Flow Rate | 150 |
Drainage Area m2 | 8335 |
Storage Capacity Silt | 1500L |
Storage Capacity Oil | 225L |
Length | 2947mm |
Diameter | 1220mm |
Inlet Invert | 1450mm |
Outlet Invert | 1350mm |
Pipework Size | 315mm |
Access Shaft Diameter | 750mm |
£1,702.80
Ex Tax: £1,419.00
- Stock: In Stock
- Model: NSBE015
- Weight: 1.00kg
Available Options
Klargester NSBE015 Bypass Oil Separator 8335 m2
Features:Light and easy to install.
Class I and Class II designs.
Inclusive of silt storage volume.
Fitted inlet/outlet connectors.
Oil alarm system available.
Vent points within necks.
Extension access shafts for deep inverts.
Maintenance from ground level.
GRP construction
About Separators
Separators do what their name suggests – separate out from drainage/run-off waters contaminants that need to be removed before the drainage adversely affects the environment (whether a watercourse or the local groundwater) and/or your drainage system and equipment. Contaminants may include substances such as grease, oil, dissolved oil, petrol, detergents, degreasers or trade effluents.Where the run-off is coming from a relatively low risk area (e.g. car-park) then what is known as a 'source control approach' using techniques such as permeable surfaces or infiltration trenches might be enough to offer sufficient protection to the local environment and thus obviate the need for a separator system. There are a variety of separator systems available for various business needs and these are explained at length within this site, plus helpful links to the Environment Agency website.