FOGI Single Stage 680L for Fats, Oils & GreasesThe FOGI Grease interceptor/separator range has been designed to conform to both Building Regulations Part H and also BSEN 1825 the British Standard for Grease Separators/Interceptors. The FOGI’s design will effectively intercept (FOGS) fats, oils a..
Forecourt Separator 10,000 LtrClass 1 and 2Forecourt separators are full retention separators specified to retain on site the maximum spillage likely to occur on a petrol filling station. They are required for both safety and environmental reasons and will treat spillages occurring during vehicl..
The Darcy separator Oil alarm is powered by mains & is supplied with a control unit and an Oil Conductivity probe.You can monitor up to 3 probe units and the outlet relay enables the status of each unit to be signalled to a remote location of your choosing. The alarm can be installed up to 300m ..
NSBP003 Bypass Oil Separator 1670 m2Features:
Light and easy to install.
Class I and Class II designs.
Inclusive of silt storage volume.
Fitted inlet/outlet connectors.
Oil alarm system available.
Vent points within necks.
Exten..
NSFP003 Full Retention Separator 170 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availabl..
NSG04 Grease Separator 2000LBenefits:
Greatly reduces incidents of blocked drains from catering
establishments.
Improves the performance of septic tanks and field drains.
Prevents contamination of small sewage treatment plants.
..
Rewatec bypass separator CNSB3S/21 1,667m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to p..
Rewatec full retention separator CNS4 222m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Rete..
Rewatec washdown separator 2,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
Overview:The Siltguard series is tailored for capturing and eliminating silt and debris from runoff on impermeable surfaces such as roofs, paths, driveways, patios, car parks, roads, and highways. Integrating Siltguard into Sustainable Drainage Systems (SuDS) enhances primary treatment for surface w..
Application:For the catchment and removal of silt, debris and litter, before entering a surface water storage system. This model is primarily designed to be installed upstream of small to medium sized modular/crate type attenuation systems, ponds and swales.Description:One-piece ready to install uni..
W1/010 Washdown/Silt Separator 1000L(car wash 1-3 cars per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Total Capacity: 10..
NSBP004 Bypass Oil Separator 2500 m2Features:
Light and easy to install.
Class I and Class II designs.
Inclusive of silt storage volume.
Fitted inlet/outlet connectors.
Oil alarm system available.
Vent points within necks.
Exten..
NSFP006 Full Retention Separator 335 m2Features:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent po..
Rewatec bypass separator CNSB4.5S/21 2,500m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS6 333m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Rete..
Rewatec washdown separator 3,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
W1/020 Washdown/Silt Separator 2000L(car wash 1-5 cars or 1-2 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Tot..
500 Siltblok Series, ø150mm or ø225mm Twinwall, 1.5m DepthThe SILTBLOK SSSB1200 model is designed for installation upstream of large volume, cellular/crate – attenuation systems, ponds, swales and irrigation systems.1200mm diameter, single piece - factory built units, delivered to site ready to inst..
FOGI Single Stage 1340L for Fats, Oils & GreasesThe FOGI Grease interceptor/separator range has been designed to conform to both Building Regulations Part H and also BSEN 1825 the British Standard for Grease Separators/Interceptors. The FOGI’s design will effectively intercept (FOGS) fats, oils ..
NSBP006 Bypass Oil Separator 3335 m2Features:
Light and easy to install.
Class I and Class II designs.
Inclusive of silt storage volume.
Fitted inlet/outlet connectors.
Oil alarm system available.
Vent points within necks.
Exten..
NSG06 Grease Separator 3000L Benefits: Greatly reduces incidents of blocked drains from cateringestablishments.Improves the performance of septic tanks and field drains.Prevents contamination of small sewage treatment plants. About SeparatorsSeparators do what their name su..
Rewatec bypass separator CNSB6S/21 3,333m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to p..
Rewatec full retention separator CNS8 444m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Rete..
Rewatec washdown separator 4,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
W1/030 Washdown/Silt Separator 3000L(car wash 6-9 cars or 3-5 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Tot..
FOGI Single Stage 1020L for Fats, Oils & GreasesThe FOGI Grease interceptor/separator range has been designed to conform to both Building Regulations Part H and also BSEN 1825 the British Standard for Grease Separators/Interceptors. The FOGI’s design will effectively intercept (FOGS) fats, oils ..
NSBE010 Bypass Oil Separator 10,000LFeatures:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP con..
NSFA010 Full Retention Separator 555 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Oil alarm system available..
Rewatec bypass separator CNSB8S/21 4,444m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to p..
Rewatec full retention separator CNS10 556m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Ret..
Rewatec washdown separator 6,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
W1/040 Washdown/Silt Separator 4000L(car wash 10 cars or 6 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Total ..
NSBE015 Bypass Oil Separator 8335 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP con..
NSFA015 Full Retention Separator 835 m2 CoverageFeatures:
Light and easy to install.
Class I and Class II designs.
3-30 l/sec range independently tested and performance sampled, certified by the BSI.
Inclusive of silt storage volume.
Fitted inlet/ou..
NSG09 Grease Separator 4000LFeatures: Greatly reduces incidents of blocked drains from cateringestablishments.Improves the performance of septic tanks and field drains. Prevents contamination of small sewage treatment plants. About SeparatorsSeparators do what their n..
NSG14 Grease Separator 6000LFeatures: Greatly reduces incidents of blocked drains from cateringestablishments.Improves the performance of septic tanks and field drains. Prevents contamination of small sewage treatment plants. About SeparatorsSeparators do what their n..
NSG18 Grease Separator 8000LFeatures: Greatly reduces incidents of blocked drains from cateringestablishments.Improves the performance of septic tanks and field drains. Prevents contamination of small sewage treatment plants. About SeparatorsSeparators do what their name s..
NSG24 Grease Separator 11,000LFeatures: Greatly reduces incidents of blocked drains from cateringestablishments.Improves the performance of septic tanks and field drains. Prevents contamination of small sewage treatment plants. About SeparatorsSeparators do what their name..
Rewatec bypass separator CNSB10S/21 5,555m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to ..
Rewatec full retention separator CNS15 833m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Ret..
Rewatec washdown separator 8,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
W1/060 Washdown/Silt Separator 6000L(car wash 15 cars or 10 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Total..
NSBE020 Bypass Oil Separator 11111 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP co..
NSBE025 Bypass Oil Separator 13890 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP co..
NSFA020 Full Retention Separator 1115 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availab..
Rewatec bypass separator CNSB15S/21 8,333m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to ..
Rewatec full retention separator CNS20 1111m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
Rewatec washdown separator 10,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste c..
W1/080 Washdown/Silt Separator 8000L(car wash 16-19 cars or 11-15 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: ..
NSBE030 Bypass Oil Separator 16670 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP co..
NSFA030 Full Retention Separator 1670 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availab..
Rewatec bypass separator 11,111m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to provide fu..
Rewatec full retention separator CNS30 1667m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
Car Wash Silt TrapSilt trap for car wash or forecourt uses Designed for easy silt removalAbout SeparatorsSeparators do what their name suggests – separate out from drainage/run-off waters contaminants that need to be removed before the drainage adversely affects the environment (whether a water..
W1/100 Washdown/Silt Separator 10000L(car wash 20-30 cars or 16-20 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs:&nbs..
NSBE040 Bypass Oil Separator 22222 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP co..
NSFA040 Full Retention Separator 2225 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system av..
Rewatec bypass separator CNSB25S/21 13,889m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS40 2222m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
W1/120 Washdown/Silt Separator 12000L(car wash 31-45 cars or 21-30 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs:&nbs..
NSBE050 Bypass Oil Separator 27778 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP co..
NSFA050 Full Retention Separator 2780 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system av..
NSFA065 Full Retention Separator 3610 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availab..
Rewatec bypass separator CNSB30S/21 16,667m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS50 2778m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
W1/150 Washdown/Silt Separator 15000L(car wash 46-60 cars or 31-45 lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs:&nbs..
NSBE075 Bypass Separator 41667 m2Features:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.GRP constr..
NSFA080 Full Retention Separator 4445 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availab..
NSFA100 Full Retention Separator 5560 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm syst..
Rewatec bypass separator CNSB40S/21 22,222m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS60 3333m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
W1/190 Washdown/Silt Separator 19000L(car wash 61+ cars or 46+ lorries per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: To..
NSBE100 Bypass Separator 55556 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.G..
NSFA125 Full Retention Separator 6945 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm syst..
NSFA150 Full Retention Separator 8335 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm syst..
Rewatec bypass separator CNSB60S/21 33,333m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS70 3889m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
NSBE125 Bypass Separator 69444 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.G..
NSFA175 Full Retention Separator 9725 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system av..
Rewatec bypass separator CNSB80S/21 44,444m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS80 4444m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Re..
NSFA200 Full Retention Separator 11110 m2 CoverageFeatures:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system a..
Rewatec bypass separator CNSB100S/21 55,556m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not t..
Rewatec full retention separator CNS100 5556m2 Coverage"The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full R..