Forecourt Separator 10,000 LtrClass 1 and 2 Forecourt separators are full retention separators specified to retain on site the maximum spillage likely to occur on a petrol filling station. They are required for both safety and environmental reasons and will treat spillages occurring during vehicl..
The Darcy separator Oil alarm is powered by mains & is supplied with a control unit and an Oil Conductivity probe.You can monitor up to 3 probe units and the outlet relay enables the status of each unit to be signalled to a remote location of your choosing. The alarm can be installed up to 300m ..
NSBP003 Bypass Oil Separator 1670 m2 Features: Light and easy to install. Class I and Class II designs. Inclusive of silt storage volume. Fitted inlet/outlet connectors. Oil alarm system available. Vent points within necks. Exten..
NSFP003 Full Retention Separator 170 m2 Coverage Features:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system availabl..
Rewatec bypass separator CNSB3S/21 1,667m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to p..
Rewatec full retention separator CNS4 222m2 Coverage "The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Rete..
Rewatec washdown separator 2,000 L"The Environment Agency requires that discharge from pressure washers must discharge to a foul drainage system. Where no foul drainage is available, the effluent must be contained within a sealed drainage system or catch pit for disposal by a licenced waste co..
W1/010 Washdown/Silt Separator 1000L(car wash 1-3 cars per day)Features:Light and easy to install.Inclusive of silt storage volume.Fitted inlet/outlet connectors.Vent points within necks.Extension access shafts for deep inverts.Maintenance from ground level.Sizing and Specs: Total Capacity: 10..
NSBP004 Bypass Oil Separator 2500 m2 Features: Light and easy to install. Class I and Class II designs. Inclusive of silt storage volume. Fitted inlet/outlet connectors. Oil alarm system available. Vent points within necks. Exten..
NSFP006 Full Retention Separator 335 m2 Features:Light and easy to install.Class I and Class II designs.3-30 l/sec range independently tested and performance sampled, certified by the BSI.Inclusive of silt storage volume. Fitted inlet/outlet connectors.Oil alarm system available.Vent po..
Rewatec bypass separator CNSB4.5S/21 2,500m2 Area DrainedThe Rewatec bypass separators have been meticulously designed to effectively manage all rainwater runoff resulting from rainfall rates of up to 6.5mm/hr.These separators come into play in situations where it is deemed an acceptable risk not to..
Rewatec full retention separator CNS6 333m2 Coverage "The Premier Tech range of Rewatec Full Retention Separators are designed to treat the full flow that can be delivered by a drainage system, which is normally equivalent to the flow generated by a rainfall intensity of 65 mm/hr. Full Rete..