
Free Shipping
-3 %
Klargester Washdown/Silt Separator 6000L
Day
Hour
Min
Sec
£1,747.20
£1,794.00
Ex Tax: £1,456.00
- Stock: In Stock
- Model: W1/060
- Weight: 1.00kg
Available Options
Klargester Washdown/Silt Separator 6000L
(car wash 15 cars or 10 lorries per day)
Features:Light and easy to install.
Inclusive of silt storage volume.
Fitted inlet/outlet connectors.
Vent points within necks.
Extension access shafts for deep inverts.
Maintenance from ground level.
Sizing and Specs:
Total Capacity: 6000L
Max Rec Silt: 3000L
Max Flow Rate L/S : 16
Unit Length : 4530mm
Unit Diameter : 1440mm
Access Shaft Diameter: 600mm
Base to Inlet Invert : 1360mm
Base to Outlet Invert : 1310mm
Standard Fall Across: 50mm
Minimum Inlet Invert: 500mm
Pipework Diameter : 160mm
Weight Aprox Empty: 320kg
About Separators
Separators do what their name suggests – separate out from drainage/run-off waters contaminants that need to be removed before the drainage adversely affects the environment (whether a watercourse or the local groundwater) and/or your drainage system and equipment. Contaminants may include substances such as grease, oil, dissolved oil, petrol, detergents, degreasers or trade effluents.Where the run-off is coming from a relatively low risk area (e.g. car-park) then what is known as a 'source control approach' using techniques such as permeable surfaces or infiltration trenches might be enough to offer sufficient protection to the local environment and thus obviate the need for a separator system. There are a variety of separator systems available for various business needs and these are explained at length within this site, plus helpful links to the Environment Agency website.